Stacked Finance

Asset finance brokers in Perth

Last updated 6 November 2026

Excavators, cranes, workshop gear, utes and fit-outs for businesses across Perth and Western Australia. One application, 63+ lenders, and an answer in about fifteen minutes.

  • 63+ lenders
  • Equipment, machinery, vehicles and fit-outs
  • Low doc and no doc available
  • Answers in 15mins & we work seven days
  • Servicing all of Australia

Get a free quote

Step 1 of 2: Personal Details

Personal details
Your asset and amount
Roughly how much?
63+
lenders, one application
15 mins
for an answer, and we work seven days
$150,000
no deposit available up to, subject to your profile and the asset
$500,000
on bank statements alone, with no financials

Some of our lenders on panel (we have access to 63+ lenders)

Some of the lenders we have on panel

What we finance

What we finance for Perth businesses

Almost anything a business uses to earn, as long as it is commercial. We do not write consumer lending.

In practice that means yellow goods and civil plant, workshop and fabrication equipment, utes and light commercial fleets, trailers and transport gear, hospitality and medical fit-outs, IT and point-of-sale, agricultural machinery, and the one-off specialised item that no generic lender has a category for.

  • Yellow goods and civil plant
  • Workshop and fabrication equipment
  • Utes and light commercial fleets
  • Trailers and transport gear
  • Hospitality and medical fit-outs
  • IT and point-of-sale
  • Agricultural machinery
  • The one-off specialised item

The reason it is worth going through a broker rather than your own bank is lender fit. An excavator and a commercial espresso machine are both equipment, but they sit in different categories with different lender pools, different age limits and different appetites. A Perth café we funded recently bought a three-group commercial machine with no deposit, hospitality gear sits in a secondary category where the machine holds value while it is serviced, but far fewer lenders write it than write an excavator. Knowing which ones do is most of the job.

coffee machine
Perth Café · SETTLEDApproved and settled with no deposit3 Group Commercial espresso machine, $24,000
Resources

Mining services and civil contractors.

A lot of equipment finance in this state ultimately traces back to resources, not the miners themselves so much as the contractors around them.

Earthmoving and civil plant for site works, crushing and screening gear, lighting towers, generators, water carts, service trucks and workshop equipment at a depot in Welshpool or Kwinana supporting machines out in the Pilbara or the Goldfields.

The work is contract-shaped, and so is the income. That shape is the problem a bank template has, and it is not really a credit problem at all.

Income that arrives against contract milestones looks lumpy on a bank statement. Assessed by a lender who writes civil contracting every week, the same statements read as a contract with a start and an end.

We place those files accordingly, and we match the term to the contract rather than defaulting to five years because five is the default.

Excellent reviews from our loyal clients

5.0from 20 Google reviews

Read all reviews →

Swipe for more reviews →

  • Daniel Sutarov

    Google review

    I couldn't recommend Emmanuel enough. Fast, professional and goes the extra mile. Even to the point of driving over an hour away to sort out the final bit of finance. Absolute machine. Thank you very much for everything.

  • An Nguyen

    Google review

    Luke and his team was amazing and swift throughout the finance/purchasing of our new business Ute. Highly recommended!!

  • Sofia Martinez

    Google review

    I had such a great experience working with Emmanuel and Luciano. They made the whole process of securing finance super smooth and stress free. Communication was always clear and they went above and beyond to make sure I understood every step. Thanks to their help, I was able to secure the right funding to scale my business with confidence. Really appreciated their honesty, support and genuine care throughout the process. Highly recommend to anyone looking for a broker who actually has your best interest. Thanks guys.

  • Steve

    Google review

    Wonderful to deal with and extremely helpful in getting me the finance I needed for my business needs. I highly recommend Emmanuel.

  • Kevin Tran

    Google review

    Emmanuel and his team were very professional and responsive with our enquiries and helped me get much needed equipment, will definitely recommend to friends and family. Keep up the great work mate

  • Leeor Meirovitz

    Google review

    Can’t recommend the team at Stacked Finance enough. I was looking for a reliable asset finance broker in Sydney to help expand our fleet, and they made the whole process incredibly smooth. Unlike other brokers I’ve dealt with, they moved fast and understood exactly what my business needed without the usual back-and-forth. They secured a great rate on our new truck and handled all the heavy lifting. If you need professional asset finance services for trucks or equipment, these are the guys to call. 10/10 service.

  • Irene Nour

    Google review

    Emmanuel and Luciano from Stacked Finance went above and beyond and secured the best finace deal for me. They took the time to understand my needs, guided me through every step, and secured a great finance option quickly. Their professionalism and friendly approach made the whole experience a pleasure. I highly recommended!

  • Ivan Toma

    Google review

    The team was very helpful in helping with the finance for second hand box truck. Highly recommended

Equipment and workshop finance for Perth trades

Smaller than the mining files and much more common: a fabricator buying a press brake, a mechanic fitting out a second hoist bay, a cabinet maker upgrading a CNC router, a landscaper adding a mini excavator and a tipper trailer.

  • A press brake
  • A second hoist bay
  • A CNC router
  • A mini excavator and a tipper trailer

These usually come down to how much paperwork you want to produce. A full doc application with tax returns and financials gets the sharpest terms available to you. A low doc application works off bank statements and your trading position, which suits a business whose last lodged year does not look like the business does now.

Structure is normally a chattel mortgage, you own the equipment from day one, the lender takes security over it, or a commercial hire purchase, where ownership transfers at the end. The choice is mostly an accounting one. That is the question for your accountant, not for us.

Fremantle, Kwinana and the industrial corridors

  1. Malaga and Wangarato the north
  2. Welshpool and Canning Vale
  3. Fremantlethe working port
  4. Bibra Lake and Hendersondown towards the coast
  5. The Kwinana strip

Most of the gear we fund in this state lives in a handful of places: Welshpool and Canning Vale, Malaga and Wangara to the north, Bibra Lake and Henderson down towards the coast, and the Kwinana strip. Fremantle pulls freight and logistics equipment around it the way any working port does.

Different corridors, broadly the same finance question.

Forklifts and materials handling, racking and warehouse fit-out, light commercial fleets running between depots, workshop plant, compressors, and the trailers that move all of it. None of it is exotic. What varies is whether the item has a resale market, because that is what decides how much of the purchase a lender will fund and on what terms.

Buying interstate or privately from WA

Perth buys further from home than anywhere else in the country, and on specialised gear there is often nothing suitable in the state at all.

A private sale works the same way as it does for a truck. The lender pays the seller directly, we run a PPSR check to make sure nothing is owing against the machine, and funds do not move until the title is clean. On used equipment we arrange an independent inspection with a written report before you commit, which protects you and satisfies the lender at the same time.

The two things that slow these deals down are always the same.

Photographs that do not let a lender verify the asset.

Serial plate, hour meter, overall condition. Vague photos come straight back and the round trip costs days.

Transport not costed into the deal.

Freighting a machine across the Nullarbor is a real number and it is better in the plan than discovered after settlement.

Main Roads WA

Machinery under the RAV rules

If you are financing plant that travels on a public road under its own power or on a float, Western Australia's Restricted Access Vehicle rules are worth understanding before you buy. Main Roads WA regulates RAVs in three classes and every combination operates under a Main Roads permit or order. For plant and machinery, Class 1 is the one that matters.

Class 1 covers a vehicle that exceeds a prescribed mass or dimension limit and is a special purpose vehicle, an agricultural machine or implement, or is carrying a large indivisible item. In practice that is a long list of things a civil contractor buys.

  • Two-axle cranes and front-end loaders, truck-mounted cranes and all-terrain cranes
  • Concrete pump trucks
  • Graders, and wheeled and tracked agricultural machines
  • Low loaders, jinkers, plant trailers, extendable and platform trailers

Road trains, B-doubles and vehicles carrying multi-modal freight containers are specifically excluded from Class 1, they fall into the other two classes.

None of this changes how a lender assesses you. It changes what the machine can legally do once you own it, which is worth settling before the money moves rather than after. If the asset you are financing is a truck or a road train combination rather than plant, the full class breakdown is on our truck finance in Perth page.

Broker, bank or dealer

Financing equipment in Perth comes down to three routes, and they differ in ways that decide the outcome rather than just the rate.

Scroll the table sideways →

RouteSpecialist brokerMajor bankDealer or vendor finance
Who they lend toSole traders, contractors, small fleets and established businessesEstablished businesses with clean financials and newer assetsBuyers of that supplier's own equipment
How income is assessedFull doc, low doc or no doc, whichever fits your paperworkFull doc as standard: tax returns, financials, BASLimited assessment, geared to closing the sale
Lender choice63+ lenders, so the asset and the profile pick the lenderOne lender, one policyUsually one financier tied to the supplier
Used and private saleFunds used and private sale, including older and specialised gearPrefers new or near-new from a dealerOnly that supplier's stock
Unusual assetsPlaced with a lender who writes that categoryOften declined for having no categoryNot applicable
Pre-approval speedPre-approved before you commit, so you can move when the machine appearsYou apply once you have found the asset, then waitDecided at the point of sale, for that supplier only

Estimate your equipment finance repayments

Move the sliders for a rough monthly figure. It is a planning estimate, not an offer, your actual terms depend on the asset, the structure and your profile.

5 years
0% = $0

Monthly Repayment

$497

Total Cost of Loan$29,844
Amount financed$25,000
Weekly$115
Fortnightly$230
Balloon payment at end of term$0
Quick Apply →

Your figures above are attached to the message, no re-typing.

Estimate only. Not a quote or an offer of finance.

Our guide to asset finance in Perth

Perth businesses buy more of their equipment from outside the state than anyone else, which puts the weight on pre-approval, inspection and getting transport into the numbers early.

TYPICAL LOAN DETAILS

  • 63+ lenders available
  • Equipment, machinery, vehicles, trailers and fit-outs
  • Weekly, fortnightly, or monthly repayments
  • Independent inspection arranged on used and interstate purchases
  • Pre-approval before you commit to a machine
  • No deposit available up to $150,000, subject to your profile and the asset. Above that, a deposit is usually required
  • Loans of $1 million and more
  • Up to $500,000 on bank statements alone, with no financials
  • Weekend settlement available
Five members of the Stacked Finance team, in a row of overlapping circular headshots

Get in touch with our asset finance team today.

Submit an enquiry and we’ll call you back as soon as possible.

Recent asset finance settlements

  • coffee machine

    Perth Café

    Approved and settled with no deposit

    Hospitality equipment, a smaller lender pool than yellow goods

    3 Group Commercial espresso machine, $24,000

  • 2025 Isuzu FXY 260-355 livestock truck with cattle crate

    Livestock transport

    No deposit on a truck and crate, settled inside a week

    No deposit, truck and trailer together, waiting on details to come through

    2025 Isuzu FXY 260-355 with cattle crate and livestock trailer

  • Concrete Supplier

    Pre-approved before rego, settled once it came through

    Private sale, unregistered, at the edge of lender age limits

    2005 Mack Metro Liner agitator, 471,000km

  • incapost truck

    Courier Business

    Approved in 24 hours at a sharper rate than the dealership

    New delivery contract, truck needed fast, bought in Newcastle, dealer finance slow

    2024 Isuzu Pantech

Our process

  1. 01Step 1

    Learn about you

    What the business does, what the equipment is for, and what your paperwork looks like.

  2. 02Step 2

    Match the lender

    Different assets sit with different lenders. We take the file to the ones who write yours.

  3. 03Step 3

    Get pre-approved

    Approval before you commit, so you can move when the right machine comes up.

  4. 04Step 4

    Settle and get working

    Inspection, PPSR, payment direct to the seller, and the equipment is yours.

ABOUT STACKED FINANCE

Why choose Stacked Finance?

Australia Wide

Our core team is based in Sydney. However, we support businesses all over Australia including Melbourne, Brisbane, Perth, Adelaide, Gold Coast, Canberra, and Newcastle.

Trustworthy

We believe integrity is the most important quality of a broker. Our team is honest and transparent about the options, fees, rates, timelines, and anything else you need to know.

24/7 Support

We’re committed to helping our clients. This means being available when they are. Most of our clients are busy running their companies – we ensure we’re available to support you when you need it most.

Let's talk loan details

LOAN AMOUNTS
Up to $1 million and more
LOAN TYPE
Secured and unsecured
REPAYMENTS
Weekly, fortnightly, and monthly
INTEREST RATE
Fixed
LOAN TERMS
One to five years, and up to seven years on some equipment classes and up to ten on solar.
BALLOON
Up to 50% on a new vehicle over three years, and up to 40% over five. Up to 40% on used trucks, trailers and primary assets, and more on newer equipment with some lenders.
DEPOSIT
No deposit required. Deposits are usually required above $150,000, though some lenders go higher without one.
ASSET AGE LIMIT
Some lenders apply no asset age limit at all, and we have lenders with no age cap on trailers at any value. 25 years at end of term is the common guide on larger deals.

Frequently Asked Questions

What kinds of equipment can you finance?

Civil and earthmoving plant, workshop and fabrication machinery, forklifts and materials handling, utes and light commercial fleets, trailers, hospitality and medical fit-outs, IT and point-of-sale systems, and agricultural machinery. If an item has a resale market and the purchase is commercial, there is almost always a lender for it. We do not write consumer lending.

Do I need a deposit for equipment finance?

Not always. No deposit is available up to $150,000, subject to your profile and the asset. Above that, a deposit usually enters the conversation, though the equipment itself carries a lot of the security. The deciding factors are the asset type, its age and your trading history, so it is worth asking before assuming you need to save first.

Can you finance used or second-hand machinery?

Yes, including private sales. On used gear the lender pays the seller directly, we run a PPSR check to confirm nothing is owing against the machine, and we arrange an independent inspection with a written report before you commit. Age limits vary widely between lenders, which is exactly why the lender is chosen to suit the asset rather than the other way round.

How long does equipment finance take?

An approval can land within 24 hours on a clean file and funding has gone through in as little as eight hours. For a Perth purchase the realistic timeline usually depends on the asset rather than the finance, a used machine interstate needs an inspection and a PPSR check first, and transport across the Nullarbor needs booking. Pre-approval first keeps everything after it short.

What is the difference between a chattel mortgage and a hire purchase?

Under a chattel mortgage you own the equipment from day one and the lender registers security over it. Under a commercial hire purchase, ownership passes to you at the end of the term. For most businesses the practical difference is an accounting one rather than a cashflow one, so it is a question for your accountant.

Can I get asset finance with a short trading history?

Often yes. A short history narrows the lender pool rather than closing it, and the lenders who write newer ABNs are a different set from the majors. A low doc application assessed on bank statements and the work in front of you is the usual route. The asset itself matters here too: equipment with a strong resale market is easier to fund than something specialised.

Do you finance fit-outs?

Yes. Hospitality, medical, dental and retail fit-outs are all financeable, though they sit in a different category from yellow goods because a fit-out is harder to recover and resell. That means a smaller lender pool and a different assessment, not a closed door. We place these with financiers who write the category regularly.

Does the RAV system affect financing a machine?

Not the assessment, but it affects what you can do with the machine. Western Australia regulates Restricted Access Vehicles through Main Roads WA in three classes, and plant such as cranes, concrete pump trucks, graders, low loaders and jinkers falls under Class 1 when it exceeds a prescribed mass or dimension limit. Every combination runs under a Main Roads permit or order.

Can you finance equipment bought from interstate?

Yes, and for Perth businesses it is routine rather than unusual, because specialised gear often does not exist in the state. The process is the same as a local purchase with two additions: an independent inspection on used equipment, and freight costed into the deal from the start rather than discovered after settlement.

Do I need to own property?

No. Property can widen the lender pool on a larger purchase, but it is not a requirement and plenty of the businesses we fund are not property owners. The equipment is the security. Where property helps most is on higher amounts or on assets with a thinner resale market.

Can repayments be structured around my cashflow?

Yes. Weekly, fortnightly and monthly are all standard, and seasonal structures are available for businesses whose income arrives in cycles rather than evenly, common for agricultural machinery and for contractors working to shutdown schedules. It has to be arranged at the start rather than renegotiated later, so raise it in the first conversation.

Can you finance more than one asset at a time?

Yes. Multiple assets can go on one facility or be split across lenders where that produces a better result, which is common when a contractor buys a machine and the float to move it. Splitting is sometimes the sharper outcome because the two assets suit different lenders, and that is a decision we make per deal rather than by rule.

Can you finance a machine bought from an overseas supplier?

Some lenders do, and specialised gear often has to come in from overseas. Talk to us before you pay the supplier a deposit.

Can I release equity from equipment I already own?

Yes. A machine you own outright can be refinanced to free up capital. Contractors use it to fund a float, or a second machine, without touching the overdraft.

Emmanuel Nassar, Co-founder of Stacked Finance

Need help with finance?

Send us a message or call directly on 0417 209 702

Get a free quote

Step 1 of 2: Personal Details

Personal details
Your asset and amount
Roughly how much?

Send us a message

We'll get back to you shortly.

Apply in 2 simple steps

No impact on your credit score. Hear back ASAP.

Step 1 of 2: Personal Details

Personal details
Your asset and amount
Roughly how much?
Emmanuel

Emmanuel

Asset Finance Director

Need help with finance?

Send us a message or call directly on 0417 209 702

By sending this message you agree that we may contact you about your enquiry. Your details are handled in line with our Privacy Policy.